Cooling Tower Pty Ltd Specialists in Heat Transfer Products and Services
07 5540 7693
Representing EVAPCO
Macromedia Flash Plugin Required.

Cooling Tower Mechanical Services in Brisbane

Also Serving - Townsville, Gold Coast, Cairns, Darwin and More

As an authorized EVAPCO Mr. Good Tower Service Centre we are equipped to provide the right solution for genuine factory authorized spare parts and services to suit all makes and models of evaporative cooling equipment. We also have the in-house engineering capability to manufacture custom parts. Can’t source the part? No problems, we’ll make it.

Access to patented innovative technology and quality spare parts forged from EVAPCO’S state of the art, five and a half thousand square metre Research and Development Centre, ensures that only the highest quality spare parts and equipment is consistently delivered to the customer.

Whether it’s fan shaft alignment, bearing alignment or motor replacement for your cooling tower, we have you covered — make the call today!

Mr. Good Tower
  • To protect your assets
  • To extend the life of your equipment
  • To improve thermal performance
  • To eliminate problems
  • To reduce maintenance costs

Spare parts to suit all makes and models of Cooling Towers, Closed Circuit Fluid Coolers and Evaporative Condensers.

Access systems Access systems – Safety access ladders, platforms, and handrails along with stairways and staircases to suit any application, hot dip galvanized after fabrication. Also available in fibreglass stainless steel, aluminium and timber construction. Manufactured and engineer certified as necessary in accordance with AS1657-2013.
Cooling tower spare parts in Brisbane Bearings – Providing a wide range of both vertically and horizontally mounted 2 bolt pillow block and 4 bolt flange mounted bearings to suit any cooling tower application, modified for cooling tower and wetted air stream operation.
Bearing Housing assembly’s Bearing Housing assemblies – Supplied complete with fan shaft, bearings, and hardware, pre-aligned and pre-greased ready for immediate installation. Designed to minimize equipment down time and the difficulties associated with replacing corroded or damaged components.
Belts Belts – Individual V belts and multi-groove power banded belts are available for all applications supplied in both imperial and metric sizes. Mechanical solutions are available on units that have transmission problems with belts disengaging associated with excessively long belts.
Coatings and sealants Coatings and sealants – We offer a variety of water leak repair and protective coating options specifically designed to seal basin water leaks and prevent corrosion. Suitable for galvanized steel, stainless steel, concrete and fiberglass materials. Other water leak sealing solutions are available and recommended where applicable.
Coils Coils – Elliptical tubed coils designed for maximum heat transfer and increased thermal performance. Available in stainless steel, hot dipped galvanized steel, and copper. – Round tube or high performance elliptical tube. Designs available to suit Aqua Cool, Auscon, BAC, EVAPCO, Fibretech, Fibreflow, Muller and Superchill.
Coil casing sections Coil casing sections – Available in galvanized steel, powder coated steel, or stainless steel casing finish supplied complete with heat transfer coil, drift eliminators, water distribution system, sealers, hardware, and pipe connections for quick change over with minimal unit down time.
Drive shafts and couplings Drive shafts and couplings – Drive shafts available in stainless steel and carbon fibre construction. Genuine factory authorized parts and custom designs available. Suitable for small factory assembled and large field erected cooling towers. Aqua Cool, Auscon, BAC, EVAPCO, Fibretech, Fibreflow, Muller and Superchill
Drift eliminators Drift eliminators - High efficiency UV stabilized PVC drift eliminators, exceeding AS3666 standards with a drift loss rating of 0.001%, water saving, superior strength cellular construction, also available in high temperature material .
Fans, Axial Fans, Axial – Multi-blade, adjustable pitch, low noise, high efficiency axial flow fans. Available in aluminum, glass nylon, polypropylene or fiberglass construction. Sizes up to and in excess of 10metre diameter.
Fans, Centrifugal Fans, Centrifugal – Featuring forward curved design, statically and dynamically balanced for vibration free operation, unmatched 2 year warranty, available in stainless steel, galvanized steel, powder coated steel construction, sizes 15” to 30” diameter, suitable for all makes and models – Aqua Cool, Auscon, BAC, EVAPCO, Fibretech, Fibreflow, Muller and Superchill.
Fan shaft, solid Fan shaft, solid – Manufactured to very close tolerances for surface finish, roundness, hardness and straightness to provide long service life with reduced maintenance. Available in steel and stainless steel construction, ground and polished for vibration free operation. Suitable for all makes and models - Aqua Cool, Auscon, BAC, EVAPCO, Fibretech, Fibreflow, Muller and Superchill.
Fan shaft, tubular Fan shaft, tubular (hollow) – Machined precisely for vibration free operation, journals ground and polished, available in steel and stainless steel construction. Suitable for all makes and models - BAC and EVAPCO, Muller, Superchill, etc.
Fiberglass components Fiberglass components – Supplying a complete range of fiberglass components including fan stacks, panels, casing sections, cold water basins, air inlet rings, etc.
Fill media Fill media – Offering a wide range of fill media to suit HVAC and industrial applications, crossflow and counterflow cooling tower designs - solutions for all units and cooling processes. Recommendations can be provided for site specific requirements to optimize fill selection and minimize potential fouling associated in harsh environments.
Gearboxes Gearboxes – Right angle drive geareducers manufactured and designed specifically for the unforgiving evaporative cooling environment - HVAC and heavy industrial industry. Sugar Mills, mining sites, petrochemical plants, and power stations.
Hardware Hardware – Nails, nuts, bolts, washers, wing nuts, access door spares, self tappers – galvanized, stainless steel.
Inlet Louvres Inlet Louvres – Water Tight Sight (WST) innovative technology designed to eliminate splash out and sunlight whilst maximizing airflow for superior thermal performance. Available with PVC or stainless steel frames or bare louvre without frames.
Low Sound solutions Low Sound solutions – four sound reducing options available for sound sensitive applications where the lowest sound levels are required. Boasting up to a 15 dB(A) reduction suitable for all makes and models. Low sound fans, Super Low Sound Fans (SLSF), fan discharge sound attenuators, water silencer.
Make-up float valves Make-up float valves – High capacity valve kits complete with adjustable stainless steel threaded rod and PVC ball float. Available up to 2 inch diameter, brass or stainless steel construction. Electronic valves available upon request.
Mechanical support frames and motor slides Mechanical support frames and motor slides – Designed to provide an immovable base for mechanical transmission equipment to be fixed. Genuine factory authorized and custom engineered designs to suit any makes and models. Available in hot dip galvanized steel after fabrication or stainless steel construction.
Cooling tower motors in Townsville Motors – Cooling tower spec motors are design and modified specifically for the harsh wetted air stream environment, minimum I.P56 protection rating. Suitable for both direct drive and belt drive applications. Available with stainless steel shaft, extend shaft length, multiple pole & 2 speed options.
Nozzles and grommets Nozzles and grommets – Low clog non rotating nozzles, designed to operate in the extreme conditions, easy removal minimal maintenance, reduce potential to foul .
Pumps Pumps – Recirculation pumps available to suit various types and sizes of closed circuit fluid coolers and evaporative condensers. Also available with spacer coupling drive arrangement for large HVAC and industrial applications suitable for condenser and chiller water loops.
Pulley’s, Aluminum Pulley’s, Aluminum – Manufactured from high grade aluminum designed for moist air stream operation, corrosion resistant, up to 80% less weight than cast steel, reduce maintenance, static and dynamic load reduction on the drive train resulting in increased service. Supplied with power banded belts, also available in cast steel, stainless steel and PVC construction.
Rotating sprinkler heads and accessories Rotating sprinkler heads and accessories – Complete range of rotating sprinkler heads and branch arm accessories suitable for all types of round bottle type cooling towers. Available in aluminum and PVC construction.
Strainers Strainers – Anti cavitation cold water basin strainer designed from perforated mesh. Supplied in stainless steel or galvanized steel. Available in cylindrical and square flat style. Suitable for Aqua Cool, BAC, EVAPCO, Muller, etc.
Variable Speed Drives and controller components Variable Speed Drives and controller components – In an energy conscious society and the cost of electricity set to soar further, variable speed drives (VSD) are a must providing significant energy savings and capacity control.
Water distribution systems Water distribution systems – Sufficient water coverage over the wet deck surface is critical to the performance of any evaporative cooling equipment. Offering a complete range of water distribution kits and custom retrofit kits including, distribution optimization, upgrades to pipe design and latest technology nozzle designs for superior water distribution.